Which Sandpaper Grit for Drywall
Drywall sanding is a critical step that defines the quality of your finished walls. Even the most skilled joint compound application can look uneven if the sanding is not executed correctly. Knowing what grit sandpaper for drywall to use at different stages ensures that your surface becomes paint-ready and professional. The process is less about pressure and more about precision.
When performed carefully, drywall sanding blends seams, gets rid of ridges, and results in a flawless, perfectly smooth surface ready for painting.
Importance of Sandpaper Grit in Drywall Sanding
The grit number on sandpaper represents how coarse or fine the abrasive surface is. A coarser number means the sandpaper is coarse and removes material quickly, while a higher number creates a fine surface. Choosing the right grit size for drywall prevents damage such as paper tearing, visible scuffs, or uneven surfaces.
If the grit is too coarse, it can tear through the compound or leave swirl marks that affect the final appearance. If it’s too fine too early, it can fail to remove ridges effectively. The goal is to move in stages from coarse to fine for a seamless finish.
Ideal Grit Sequence for Sanding Drywall
Professional drywall finishers typically follow a three-stage grit progression to achieve optimal results:
• 100–120 grit: Best for the first sanding pass to remove high areas after joint compound application. This grit should be used lightly to prevent surface tearing.
• 120–150 grit: Perfect for blending seams once the major imperfections are removed. This grit provides the main surface refining phase.
• 180–220 grit: Used for final finishing before priming or painting. It creates a consistent surface without imperfections.
This sequence ensures each layer of compound is refined properly, resulting in a durable wall.
Must-Have Drywall Sanding Tools
Using proper tools is as important as selecting the right grit. Quality equipment helps maintain smooth contact, reduces fatigue, and keeps dust under control.
Common tools include:
• Sanding block or hand sander for small areas
• Pole sander for high or wide wall sections
• Flexible sponges for edges
• Perforated sandpapers for dust reduction
• Dust mask or respirator for safety
• Side lighting to identify flaws
These tools help ensure professional-quality outcomes without damaging the drywall paper.
Step-by-Step Drywall Sanding Guide
Sanding drywall is a careful process. Following professional techniques prevents common surface flaws and ensures your work looks seamless once painted.
1. Let the Joint Compound Dry Completely
Always wait for the compound to dry fully before sanding. Partially dried mud will clog sandpaper and ruin your finish. Fully cured compound turns into fine dust when sanded, allowing for smooth sanding.
2. Apply Light, Even Pressure
Avoid pressing too hard. Let the sandpaper do the work while maintaining gentle rhythm. Excessive pressure can damage the paper surface.
3. Feather the Edges
Blend the joint compound smoothly into the drywall using gentle sweeping motions. Focus on transitions rather than flat surfaces to create a seamless appearance.
4. Use Angled Lighting
Shine a light across the wall’s surface to highlight flaws that might not be visible head-on. This ensures all imperfections are addressed before painting.
5. Switch to Finer Grit for Final Passes
Once the wall feels flat and smooth, move to 180–220 grit sandpaper. This stage polishes the surface and prepares the wall for the final coat.
How to Sand Drywall Corners
Corners and edges need careful sanding. Use a fine-grit sanding sponge or folded sandpaper to reach these areas. Sand one side at a time with light passes to avoid damaging the tape or paper.
For inside corners, a few light passes are usually enough to blend the edges without thinning the surface material. Careful motion is the key to maintaining joint integrity.
What Not to Do When Sanding Drywall
Many DIY finishers make the mistake of being too aggressive or skipping crucial steps. To achieve a high-quality outcome, avoid the following:
• Cutting into the drywall surface
• Starting with too low a grit number
• Forcing the sandpaper into the wall
• Failing to identify imperfections
• Ignoring safety precautions such as dust masks
Patience, precision, and proper technique matter more than speed during drywall sanding.
Preparing Drywall for Painting
Before what grit sandpaper for sanding drywall applying paint, ensure that the wall is completely free from sanding particles. Wipe the surface with a microfibre cloth or a vacuum attachment designed for drywall dust. Check all areas under bright illumination to confirm a consistent finish. Using final drywall sanding grit ensures a even and receptive surface for primer adhesion.
A properly sanded wall allows primer and paint to adhere smoothly, preventing uneven coating and ensuring a uniform appearance.
Conclusion
Mastering what grit sandpaper for drywall to use at each stage can dramatically enhance the quality of your walls. Start with medium grit to remove rough patches, move to finer grits for blending, and finish with ultra-fine sanding for that professional surface.
By combining the right tools, lighting, and a consistent technique, you can achieve a high-end drywall finish that looks impeccable under any paint or lighting condition. Consistency and patience are the true secrets to expert-level drywall finishing.